Cabinet Dustless Glass Bead Sandblasting Machine Surface Preparation Car Part / Steel Work-piece
Sandblasting Machine Product Introduction
A blast cabinet is essentially a closed-loop system that allows the operator to blast the part and recycle the abrasive. It usually consists of four components; the containment (cabinet), the abrasive blasting system, the abrasive recycling the system, and the dust collection.
The operator blasts the workpiece from the outside of the cabinet by placing his arms in gloves attached to glove holes on the cabinet, viewing the part through a view window, turning the blast on and off using a foot pedal or treadle.
Automated blast cabinets are also used to process large quantities of the same component and may incorporate multiple blast nozzles and a part conveyance system. There are two systems typically used in a blast cabinet: siphon and pressure
Technical Features:
| MACHINE TYPE |
STR-BL Glass edge blasting machine |
| MACHINE SIZE(mm) |
3380 ×1200× 2080 |
| DUST REMOVAL SYSTEM |
800× 800× 2480 |
| DUST REMOVAL MOTOR |
1.5KW 380V |
| SPEED MOTOR |
1.5KW 380V |
| GUN WORKING PRESSURE |
0 .28 - 0.7Mpa |
| OPTIMAL WORKING PRESSURE |
0.4 - 0.6 Mpa |
| FLOW OF EACH GUN |
0.8 - 1.2m3/min |
| INNER DIAMETER OF EXTERNAL GAS SOURCE |
￠13mm |
| ABRASIVE |
46-220# |
| SPRAY GUN |
4 |
| DUST REMOVAL METHOD |
Bag-type dust removal system uses 16 bags of dust removal |
Product Features:
Electroplating, spraying process, improve adhesion; All kinds of mold, casting parts, metal, nonmetal surface heat treatment, to oxide skin, to the residue, rust, oil, refurbished; All ceramic products, glass products, plastic products, light act the effect!
Product Tags:
|
|
Portable Glass Bead Blasting Equipment Car Part Steel Work Piece Dustless Images
|
